Onwa KR-1008 36NM Radar

Antenna Radiator

Radiator

Slotted waveguide Array

Radiator Length

55 cm

Antenna Rotation Speed

24 RPM (±2)

Wind Resistance

Relative wind speed 100 knots(51.5 m/s)

Beam Width

Horizontal 4°
Vertical 25°

Sidelobe

Within ± 20° off mainlobe; less than -18 dB
Outside ± 20° off mainlobe; less than -23 dB

Polarization

Horizontal

Transceiver Module (contained in Radome)

Transmitting Tube

MSF1421B or MAF1421B

Frequency

9410 ± 30MHz (X-band)

Pulse Length PPR

0.08 µ s/2100 Hz(0.125, 0.25, 0.5, 0.75, 1.5 nm)
0.3µ s/1200 Hz(1.5, 2, 3 nm)
0.8 µ s/600 Hz(3, 4, 6, 8, 12, 16, 24, 36 nm)

Warm Up time

1:30 minutes

Peak Output Power

4 kW nominal

Modulator

FET Switching Method

60MHz

Tuning

Automatic or Manual

Receiver front end

MIC (Microwave IC)

Bandwidth

Tx pulselength 0.3 µS and 0.08µS: 25 MHz
Tx pulselength 0.8µS: 3 MHz

Noise Figure

10 dB nominal

Duplexer

Circulator with Diode Limiter

Environment

Temperature

Display unit: -15 to +55°C
Antenna unit: -25 to +70°C

Humidity

Relative humidity 93% or less at 40°C

Power Supply

10.5 VDC to 40.0 VDC, 60W (30W in economy mode)

Display Unit

Type

10-inch LED backlight, 32-bit TFT Color LCD Display

Display Modes

Head-up, Course-up*, North-up*, True Motion**
* Heading input required
** Heading and speed inputs required

Range Scale

Range: 0.125, 0.25, 0.5,0.75, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 36
Range Interval: 0.0625,0.125,0.125,0.25,0.25,0.25,0.5,0.5,1,1,2,2,4,4,6
Number of Rings: 2,2,4,3,4,6,4,6,4,6,4,6,4,6,6

Bearing Resolution

4°

Bearing Accuracy

Within 1°

Range Discrimination

Better than 30 m

Range Ring Accuracy

0.9% or range in use or 8 m whichever is larger

Minimum Range

Better than 25 m

Target Tracking Function

Acquisition : 40
Tracking : Auto
Display : Speed, Course, Range/Bearing and CPA/TCPA

Vibration

Vibration Total Amplitude:
1 to 12.5 Hz± 1.6 mm
12.5 to 25 Hz± 0.38 mm
25 to 30 Hz± 0.1 mm

Echo Trail

Interval: 15s, 30s, 1min, 3mins, 6mins, 15mins, 30mins or continuous

Interface

any talker (menu selection) input
$–APB,$–BWC,$–BWR,$–DBK,$–DBS,$–DBT,$–DPT,
$–GGA,$–GLC,$–GLL,$–GTD,$–HDG,$–HDW,$–HDT,
$–MDA,$–MTW,$–RMA,$–RMB,$–RMC,$–VTG,$–VHW,$–XTE

AIS Display

Acquisition: AIS Vessels or ATON
Tracking : Auto
Display : Vessel Name, MMSI, Call sign, Range/Bearing, L/L
Speed/Course, ROT, CPA/TCPA
(AIS data input required)

Equipment List

Display unit: 1 unit
Radome Antenna unit: 1 unit
ANTENNA CABLE: 10/15/20/30m (Specify when ordering)
POWER CABLE: 3m
Operation Manual
Standard Spare Parts and installation materials : 1 set

Kargo ve Teslimat

Siparişleriniz, ödeme onayının ardından en kısa sürede hazırlanmaktadır. Stokta bulunan ürünler, sipariş onayını takiben 1–2 iş günü içerisinde anlaşmalı kargo firmaları aracılığıyla adresinize gönderilir.

Kargo teslimat süresi, gönderim yapılacak bölgeye ve kargo firmasının çalışma koşullarına bağlı olarak değişiklik gösterebilir. Resmî tatiller ve hafta sonları teslimat süresine dâhil değildir.

Marine elektronik ürünleri, taşıma sırasında zarar görmemesi için özenle paketlenerek sevkiyata hazırlanır. Büyük hacimli veya hassas ürünlerde, teslimat süreci hakkında müşterilerimiz ayrıca bilgilendirilmektedir.

Tekneye özel montaj gerektiren ürünlerde, teslimat ve montaj planlaması müşteriyle iletişime geçilerek organize edilir.

Kargo ve teslimat süreciyle ilgili her türlü soru ve talepleriniz için bizimle iletişime geçebilirsiniz.

Shipping & Delivery

Your orders are prepared as quickly as possible after payment confirmation. Products that are in stock are shipped to your address within 1–2 business days following order approval via our contracted courier companies.

Delivery times may vary depending on the destination and the operating conditions of the courier service. Official holidays and weekends are not included in the delivery timeframe.

Marine electronics products are carefully packaged to prevent damage during transportation. For large-volume or sensitive items, our customers are informed separately about the delivery process.

For products that require boat-specific installation, delivery and installation scheduling is organized through direct communication with the customer.

For any questions or requests regarding the shipping and delivery process, please feel free to contact us.