Açıklama

Onwa KRA-1007 Radar Anten 4KW 36NM

  • Dijital Radar Hedef Teknolojisi
  • Aynı protokolü tüm ONWA magnetron darbeli Radar antenleri arasında paylaşın
  • Yerleşik mükemmel deniz ve yağmur karmaşası algoritması
  • Tamamen Dijital Sinyal İşleme
  • Yüksek Performanslı Mikrodalga ön uç
  • Doğrudan veya ev yönlendiricisi aracılığıyla PC’ye bağlanabilir
  • ONWA Radar PC Yazılımını kullanabilir

Radiator

Slotted waveguide Array

Radiator Length

55 cm

Antenna Rotation Speed

24 RPM (±2)

Wind Resistance

Relative wind speed 100 knots(51.5 m/s)

Beam Width

Horizontal 4°
Vertical 25°

Sidelobe

Within ± 20° off mainlobe; less than -18 dB
Outside ± 20° off mainlobe; less than -23 dB

Polarization

Horizontal

Transceiver Module (contained in Radome) 

Transmitting Tube

MSF1421B or MAF1421B

Frequency

9410 ± 30MHz (X-band)

Pulse Length PPR

0.08 µ S/2100 Hz(0.125, 0.25, 0.5, 0.75, 1.5 nm)
0.3µ S/1200 Hz(1.5, 2, 3 nm)
0.8 µ S/600 Hz(3, 4, 6, 8, 12, 16, 24, 36nm)

Warm Up time

1:30 minutes

Peak Output Power

4 kW nominal

Modulator

FET Switching Method

IF

60MHz

Tuning

Automatic or Manual

Receiver front end

MIC (Microwave IC)

Bandwidth

Tx pulselength 0.3 µ S and 0.08 µ S: 25 MHz
Tx pulselength 0.8 µ S: 3 MHz

Duplexer

Circulator with Diode Limiter

WIFI Module (For KRA-1007W ONLY)

Standard: IEEE802.11n, IEEE802.11g, IEEE802.11b
Channels: 1~11
Frequency Range: 2.4-2.4835G
Transmit Power:15-20dBm

Environment

Temperature

Antenna unit: -25 to +70°C

Humidity

Relative humidity 93% or less at 40°C

Power Supply 

10.5VDC to 40.0 VDC Built-in Power-Supply

Shipping & Delivery

Kargo ve Teslimat

Siparişleriniz, ödeme onayının ardından en kısa sürede hazırlanmaktadır. Stokta bulunan ürünler, sipariş onayını takiben 1–2 iş günü içerisinde anlaşmalı kargo firmaları aracılığıyla adresinize gönderilir.

Kargo teslimat süresi, gönderim yapılacak bölgeye ve kargo firmasının çalışma koşullarına bağlı olarak değişiklik gösterebilir. Resmî tatiller ve hafta sonları teslimat süresine dâhil değildir.

Marine elektronik ürünleri, taşıma sırasında zarar görmemesi için özenle paketlenerek sevkiyata hazırlanır. Büyük hacimli veya hassas ürünlerde, teslimat süreci hakkında müşterilerimiz ayrıca bilgilendirilmektedir.

Tekneye özel montaj gerektiren ürünlerde, teslimat ve montaj planlaması müşteriyle iletişime geçilerek organize edilir.

Kargo ve teslimat süreciyle ilgili her türlü soru ve talepleriniz için bizimle iletişime geçebilirsiniz.

Shipping & Delivery

Your orders are prepared as quickly as possible after payment confirmation. Products that are in stock are shipped to your address within 1–2 business days following order approval via our contracted courier companies.

Delivery times may vary depending on the destination and the operating conditions of the courier service. Official holidays and weekends are not included in the delivery timeframe.

Marine electronics products are carefully packaged to prevent damage during transportation. For large-volume or sensitive items, our customers are informed separately about the delivery process.

For products that require boat-specific installation, delivery and installation scheduling is organized through direct communication with the customer.

For any questions or requests regarding the shipping and delivery process, please feel free to contact us.