Sailor 250W SSB Telsiz

Sailor RE 2100 SSB Set Olarak Çalışır Durumda

250W PEP SSB transmitter with integral power supply for RE2100.
Supply voltage 24V

GENERAL

Frequency Range: Receiver: 100 kHz to 30 MHz

Transmitter: 1.6 MHz to 30 MHz

Modes: J3E (USB/LSB), R3E and H3E (AM)

Channel Capacity: 100 user defined quick-select channels and ITU defined channels in the maritime bands. Each channel contains both RX and TX frequency and mode settings.

Scanning Facilities: 10 scanning prograammes, each able to contain 128 pairs of frequencies.

Distress Call: Quick selection of 2182 kHz Built-in two tone alarm: 1300 Hz and 2200 Hz with a duration of 45 secs. Operating Temperature Range: -15°C to +55°C

Frequency Stability: Better than 0.34 ppm

Primary Voltage: 24V DC – 10% +30%

Current Drain: Receiver (standby)0.9A Transmit voice 7A Transmit two-tone 13A

Aerials: from 7 – 15 m

TRANSMITTER T2130

Power Output: 250W PEP ± 1.4 dB (T2130/I 240W PEP max.)

Intermodulation: better than 32 dB below PEP

Spurious Emission: better than 67 dB below PEP

Harmonics: better than 43 dB below PEP or better than 67 dB below PEP with aerial coupler AT2110

Carrier Suppression: better than 46 dB below PEP

Audio Response: 350 Hz to 2700 Hz at -6 dB

RECEIVER RE2100

Receive System: Double conversion super heterodyne 1st IF 70 MHz. 2nd 10.73 MHz

Selectivity: J3E (SSB) 350 Hz to 2700 Hz at -6 dB H3E (AM) ±3.3 kHz at -6 dB PAGE 1-3 9319 1 INTRODUCTION AT2110

Sensitivity: J3E (SSB) <10 dB/uV for 20 dB SINAD H3E (AM) ><24 dB/uV for 20 dB SINAD Spurious and IF Rejection: better than -70 dB Cross Modulaton: better than 90 dB/uV (CEPT method of test) Desensitization: better than 100 dB/uV (CEPT method of test) AGC: less than 2 dB audio level change from 10 dB/uV to 80 dB/uV. Fast attack, slow release time. Intermodulation: better than 90 dB/uV (CEPT method of test) Spurious Emission: better than 1 nW into dummy aerial Clarifier: ±150 Hz in steps of 10 Hz Squelch: Voice activated, opens for SINAD >6 dB

Audio Power: 5 Watt, 8 ohm, less than 10% distortion 10 Watt, 4 ohm, less than 10% distortion

AERIAL COUPLER AT2110

Power: 250W PEP Aerials: 7 – 15m

Temperature Range: -25°C to +70°C

Tuning Time: Typically less than 2 secs (learn mode typ. 30 secs)

ACCESSORIES

Loudspeaker: H2054 see special brochure H2074 see special brochure

Power Supplies: N2160

Input supply: 12V + 30% – 10% For more information see the manual for N2160 N2161

Input supply: 110V – 127V – 220V – 240VAC

Input frequency: 50 – 60 Hz For more information see the manual for N2161

Weight: RE2100: 4.5 kg T2130: 14.0 kg AT2110: 4.5 kg